DELTAPrime 2K SD
DELTAPrime 2K SD
Description
DELTAPrime 2K SF Primer is a two component, solvent-free, medium viscosity epoxy primer specifically designed for sealing and priming concrete substrates.
DELTAPrime2K SF is ideal for solidifying porous and weak concrete substrates and can be combined with quartz sand to make a fast curing hard patch repair material.
Features
- Formulated at 1:1 ratio by volume for easy application with brush, spray or roller.
- Penetrates deeply into concrete surface
- Solvent-free. Non-hazardous.
- Exceptional adhesion to correctly prepared concrete, steel and most common construction substrates.
Typical Uses
- As a penetrating concrete densifier and primer prior to the application of DELTA protective linings.
- As a patch repair material when combined with either quartz sand or DELTAPrime Filler.
- As a base coat for DELTA floor coatings
View more information
Physical Properties
| MATERIAL TYPE | 2K Polyurethane tie coat for ferrous and non-ferrous substrates |
|---|---|
| RECOMMENDED USE | As a primer for use over aluminum, galvanized steel, mild steel, stainless steel, and other non-ferrous surfaces. As an inter-coat primer over DELTA’s range of elastomeric coatings. |
| Endorsements | 1998 COMPLIANT – 1990 EPA – PG6/23(92) Clause 19(d) Appendix 2. |
| COLOUR AVAILABILITY | Grey, red, oxide, white |
| FLASH POINT | Base: 31°C Additive: 28°C |
| SOLIDS BY VOLUME | 44 ± 2% (ASTM-D2697-91) |
| V.O.C. | 515* grams/litre * 1990 EPA – PG6/23(97) modified Appendix 3. |
| TYPICAL THICKNESS | Dry film thickness: 50 microns Wet film thickness: 114 microns |
| Theoretical coverage | 8.8 m²/liter |
| PRACTICAL APPLICATION RATES – microns per coat | Dry:
Wet:
|
| AVERAGE DRYING TIMES @ | To touch:
To recoat:
Figures are given as a guide only. Factors such as air movement and humidity must also be considered. |
| RESISTANCE TO |
|
| RECOMMENDED TOPCOATS | May be overcoated with any of DELTA´s range of products as well as other high-performance epoxies and polyurea systems, provided that the surfaces to be coated have been suitably cleaned. To achieve optimum adhesion, overcoating must be undertaken within 4 days. |
| POT LIFE |
(For notes on tropical application, see page 2) |
| PACKAGE | Two-components supplied in separate containers to be mixed prior to use. |
| Pack Size | 5 kg when mixed. |
| Mixing Ratio Weight | 5 parts base to 3 parts additive by volume. |
| Shelf Life | Minimum 1 year |
All guidelines, recommendations, statements, and technical data contained herein are based on information and tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. It is the user`s responsibility to satisfy himself, by his own investigations and testing, the suitability of the product for his own intended use, application and job situation and user assumes all risk and liability resulting from his use of the product. These products require specialized equipment and skills to apply. It is the purchaser`s responsibility to ensure that they have the necessary equipment, skills and experience to apply these products. Neither seller nor manufacturer shall be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Technical and application information is provided for the purpose of establishing a general profile of the material and application parameters. Test performance results were obtained in a controlled environment and DELTA Coatings International LLC makes no claim that these tests or any other tests can be accurately reproduced in all environments.
The rights of the purchaser regarding the quality of our materials follows completely our general terms and conditions. For requirements, which exceed the scope of the above-mentioned applications please contact DELTA technical staff.
DELTA Coatings International LLC reserves the right to change or modify the details and data contained herein at any time.
Valid is only the actual version of this technical data sheet in each case.
* DELTA recommends that in all applications involving chemicals a pre-test of the lining’s suitability in the customer`s application is conducted. Consult with DELTA Technical Team.
© Copyright, DELTA Coatings International LLC, DELTAPrime 2K SD
