DELTAShield C 1100
DELTAShield C 1100
Description
DELTAShield C 1100 is a new technology high performance, rapid curing colour fast and non-yellowing waterproofing & corrosion protection coating. DELTAShield C 1100 can provide significant savings in application and re-use times due to it being a one application, rapid curing product. There is no need for a topcoat due to DELTAShield C 1100 excellent colour and gloss retention even under harsh UV exposure.
Our product displays excellent chemical resistance and is resistant to most fuels, oils, solvents and cleaners making it an ideal solution for plant and equipment corrosion protection. DELTAShield C 1100 can be applied using an airless sprayer or rollers. With a tack free time of 45 minutes re-use times are incredibly short saving customers costly down time.
Features
- One product, one application.
- Extremely fast cure and re-use times
- Excellent colour and gloss retention. Does not yellow under UV light
- Excellent abrasion resistance
- Excellent chemical resistance
- Very good flexibility – reduces impact damage.
- Resistant to most fuels, oils, solvents, acids and caustics
- Can be used for indoor and outdoor applications
- Suitable for vertical and horizontal applications.
- Displays good flexibility and impact resistance compared to standard epoxies.
- Provides high performance corrosion protection with colour and gloss stability in one rapid curing, flexible product.
Typical Uses
- Steel corrosion protection replacing multi layered multi product systems
- Concrete façade protection system.
- Protection of concrete bridge structures
- Earthmoving equipment
- Tanks – Internal and external
- Water features & swimming pools as a water proof protective coating
- Pipe coatings – external
- External coating of bulk rail wagons
- Industrial plant coatings.
- External protection of bins, hoppers, silos.
- Can be applied as a UV and color stable top coat on top of any DELTAShield range of polyurea systems
View more information
Processing Properties
| Property | Data |
|---|---|
| Mixing ratio of Comp. A to Comp. B | 1:1 by volume |
| Material consumption – approximate L / m2 | 0.125ml @ 125 μm (Substrate dependent) |
| Recommended thickness [μm] | 125 – 500 |
| Recommended layer thickness [μm] | Up to 500 |
| Pot life at 20°C [minutes] | 45 – 60 |
| Tack free time @ 20°C, 57% humidity [minutes] | 45 – 60 |
| Handling time [h] | Light use: 1 – 1 ½, Heavy use: 4 |
| Full Cure (Normal loading) [h] | 10 – 12 |
| Temperature range for application (ambience) [°C] | +5 – +50 |
| Temperature range for application (substrate) [°C] | +5 – +50 |
| Over coat window (h) | 8 |
Physical Properties
| Property | Data |
|---|---|
| Chemical Base | Polyaspartic / Polyurea technology |
| Solids content [%] | 97 |
| Viscosity [mPa*s] @ 25°C | Comp. A: 100 Comp. B: 1940 Mix: approx. 570 |
| Density [g/cm³] @ 20°C | Comp. A: 1.18 – 1.22 Comp. B: 1.07 – 1.11 Mix: 1.15 |
| Density [g/cm³] | 1.23 ± 0.02 |
| Tensile strength [Mpa] | ≥ 16 |
| Property | Data |
|---|---|
| Elongation at tear [%] | ≥ 195 |
| Hardness [Shore D] | 68 |
| Rebound resilience [%] | ≥ 5 |
| Taber Abrasion [mg] | < 30 (Wheel CS17 / 1.000g / 1000 cycles) |
| Colour fastness | No chalking, no dis-colouration, no cracking and no blistering. |
| Colour fastness (ASTM G154a / ISO 4892) | After approx. 500 hours: No chalking, no dis-colouration, no cracking and no blistering. |
| Liquid Impingement Erosion Test conditions | Water jet 135m/s Wear resistant up to 240 min. against liquid impingement erosion |
| Max. Process temp. [°C] | Wet: 60 Dry: -20 to +120 Peak temperature dry: 140 |
| Storage conditions [°C] | 10 – 30 (in closed original drums, stored at dry and well-ventilated place. Avoid freezing) |
| Shelf life | Approximately 12 months |
Packaging
DELTAShield C 1100 is supplied in 5 or 20 kg packaging for each component.
All guidelines, recommendations, statements, and technical data contained herein are based on information and tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. It is the user`s responsibility to satisfy himself, by his own investigations and testing, the suitability of the product for his own intended use, application and job situation and user assumes all risk and liability resulting from his use of the product. Due to the large number of variables that can affect the product and the application process that are out of the control of DELTA Coatings International LLC no warranty of any kind, express or implied is given. The liability of DELTA Coatings International LLC for any claims is limited to the purchase value of the material.
